Ghost Recon Advanced Warfighter 2 Single-player Demo

This demo includes the first level of the single-player campaign.

########################################

Ubisoft
Ghost Recon Advanced Warfighter?2
README.TXT


Contents

########################################

1. Installation Instructions
1.1. System Requirements
1.2. Installation
1.3. Uninstallation
2. Gameplay Instructions
2.1. Game Setup
2.2. Default Keys
2.3. Playing on Gamespy
3. Troubleshooting
3.1. Installing Video Drivers
3.2. Installing Audio Drivers
3.3. Installing DirectX 9.0c
3.4. Bugs and Comments
3.5. Manual Errors
3.6. Manual Addendum
3.7. Release notes
3.7.1. AGEIA (tm) PhysX (tm) Release Notes
4. Useful Web Sites, Contact Information and Technical Support
4.1. Technical Support
4.2. Useful Web Sites
5. Legal Information


######################################

1. Installation Instructions

######################################

1.1. System Requirements

Minimum:
Processor: Intel or AMD, 2 GHz
Operating System: Windows XP/Vista
Memory: 1024 MB RAM
Disk Space: 2 GB
Graphics Card: 128 MB DX9.0c compatible card,
GeForce 6200 or higher
Radeon 9700 or higher
Sound Card: DirectX 9.0c compatible
DVD-ROM drive : x2 read speed
DirectX Version: 9.0c
Network: High-speed modem with 128 Kbits of data transfer upload rate for a
client, 512Kbits of data transfer upload rate for a server on a full game.

Recommended Configuration:
Processor: Intel or AMD 2.8 GHz
Operating System: Windows XP/Vista
Memory: 1024 MB RAM
Disk Space: 2 GB
Graphics Card: 256 MB DX9.0c compatible card,
Sound Card: DirectX 9.0c compatible
CD-ROM or DVD-ROM drive : x2 read speed
DirectX Version: 9.0c
Network: High-Speed Modem with 128 Kbits of data transfer upload rate for a
client, 512Kbits of data transfer upload rate for a server on a full game.

Graphics Cards Supported:
Radeon 9700
Radeon 9800
Radeon X700
Radeon X800
Radeon X850
Radeon X1300
Radeon X1600
Radeon X1800
Radeon X1900
Radeon X1950

GeForce 6200
GeForce 6600
GeForce 6800
GeForce 7800
GeForce 7900
GeForce 7650
GeForce 8800

Laptop models of these cards are not supported.These chipsets are the only ones
that will run this game. Additional chipsets may be supported after release. For
an up-to-date list of
supported chipsets, please visit the FAQ for this game on our
website:http://support.ubi.com


If you experience problems, consult paragraph 4.1.

--------------------------------------------------------------------------------
1.2. Installation

The game is made up of 1 DVD:
To install Ghost Recon Advanced Warfighter?2, insert the DVD in your DVD-ROM
drive. The setup begins automatically. Using the mouse, click on the
installation button and follow the onscreen instructions. You must type
in the CD-key located inside your game copy.
We strongly recommend to not install Ghost Recon Advanced Warfighter?2 into
your system's "Windows" folder or in any partition's root (ex: directly on C:
or D:).

Once the game is installed, launch Ghost Recon Advanced Warfighter?2, from the
Start menu and remember to put the DVD in your drive, otherwise the game will
refuse to launch.

--------------------------------------------------------------------------------
1.3. Uninstallation

To uninstall Ghost Recon Advanced Warfighter?2, follow this simple step:
Select Ghost Recon Advanced Warfighter?2 from the Start menu.
Click the uninstall option and follow the on-screen directions.


#######################################

2. Gameplay Instructions

########################################

--------------------------------------------------------------------------------
2.1. Game Setup

The Setup and Diagnosis application launched at the first launch of the game
automatically sets up the game for optimum running on your system.

All settings and modified files are placed in your user account's local
application data directory, typically C:UsersAppDataLocalGraw2.
Any custom files to be read by the game must be placed in the correct
subfolders in this directory.


--------------------------------------------------------------------------------
2.2. Default keys

The game is installed with a default set of control keys which you can change
in the Option / Controls menu in the game.

--------------------------------------------------------------------------------
2.3. Playing on Gamespy

To play on game, open the Multiplayer page in the game main menu, and click the
Internet tab. Click the Gamespy nickname field down below, and click the Create
Account button. Type in the information for the account (nickname and password
must have a minimal length of 3 characters) and click the OK button (you can
click the Auto login button to automatically join Gamespy any time you enter
the Internet page. European Union users will have to validate the 2 buttons in
the next panel to proceed with their account creation.

The login is only accepted if you are the only owner of package CD-Key logged
at this time.
Once you are logged in, you can update the list of servers available on the
Internet and pick one of your choosing.

You may experience difficulty connecting to Gamespy if a firewall or anti-virus
blocks the following ports:

Local Ports
UDP 13139
UDP 16250

Remote Ports
UDP 16250
TCP 80
TCP 443
TCP 6667
UDP 13139
UDP 27900
UDP 27901
TCP 28910
TCP 29900
TCP 29901
UDP 29910
TCP 29920



#######################################

3. Troubleshooting

#######################################

3.1. Installing Video Drivers

If you experience any graphical problems, please install the latest video
drivers available for your video card. Links to the most popular video card
manufacturers are available at the bottom of this document.

--------------------------------------------------------------------------------
3.2. Installating Audio Drivers

If you experience any sound problems, please install the latest audio drivers
available for your sound card. Links to the most popular sound card
manufacturers are available at the bottom of this document.

--------------------------------------------------------------------------------
3.3. Installing DirectX 9.0c

Ghost Recon Advanced Warfighter?2 needs DirectX 9.0c or higher to run properly.
To get the latest version of DirectX, please visit:
http://www.microsoft.com/windows/directx

--------------------------------------------------------------------------------
3.4. Bugs and Comments

Video refresh rate:
Always select the highest refresh rate supported by your monitor. This
ensures a more fluid and visually pleasing game.

**** Sound Compatibility ****

Use of HeadSet (Headphones/Microphone):

- Depending on the setup (operating system DirectX), it
may be necessary to change the hardware acceleration (setup panel > sound >
audio > sound reading > advanced).
- Some drivers apply an effect to sounds read by the PC. For some setups, this
may interfere with the operation of the sound engine.
- With some cards, a half-duplex/full-duplex manual setup is possible. For this
game, the card should be set up for full-duplex.
- As far as the headset is concerned, if the Internet connection is poor, there
is a risk of interference or breaks in voice communication during the game.
- It is often possible to configure sound cards so that they only put out the
sound signal on their digital output. In this event, you should check that this
is compatible with the audio equipment used (you should use a digital amplifier
connected to the digital output). See the sound card manual.
- Check that the input/output cables are correctly connected (2 cables to
connect when using a headset). Do not forget that sometimes there is a volume
control or a switch for the microphone on the headset lead.



**** Graphics Compatibility ****


- If the game is very slow, or the display corrupted, check that anti-aliasing
is not forced at the level of the drivers. If this is the case, deactivate it.
- If your monitor switches to Energy Saving, update the drivers for your
screen.


**** Network Compatibility ****

Problems with Firewalls
If you have a firewall on your Internet connection, check the "Playing on
Gamespy" paragraph.

**** Hardware Compatibility ****

Motherboard drivers and BIOS settings:
If your computer does not respond, check that your motherboard drivers are
up-to-date. If you have carried out changes to BIOS and the game crashes, try
restoring the default settings (or security settings).


****Sticky-keys ****

It is recommended to deactivate the sticky-keys when playing. (Control Panel ->
Accessibility Options -> Keyboard -> Use sticky keys should be unchecked).
Windows Updates while playing may minimize your game and / or make it slower.

--------------------------------------------------------------------------------
3.5. Manual Errors


--------------------------------------------------------------------------------
3.6. Manual Addendum

--------------------------------------------------------------------------------
3.7. Release notes

--------------------------------------------------------------------------------
3.7.1. AGEIA (tm) PhysX (tm) Release Notes

*) PhysX Usage and Exclusive Benefits

GRAW2 exclusively uses AGEIA PhysX technology to provide interactive physics
effects on the PC. The PhysX engine operates on any PC system to provide
overall game-play and effects physics. Beyond this, the game is designed to
take full advantage of the AGEIA PhysX Processor - the world's first and only
dedicated PC physics accelerator.

Gamers with PhysX cards get access to enhanced and exclusive bonus content in
addition to the game-play and effects standard to the software PhysX engine.
In particular, card owners unlock: ?AGEIA Island? - a level designed for a more
extensive physics experience showcasing fully realistic and interactive
environments possible only with PhysX acceleration.


*) Settings and Performance

There are three levels of PhysX adjustable via a drop-down sub-menu in the
game-menu: "Options->Video->Advanced Settings". These levels offer variable
scale and sophistication of environmental physics and interaction.

At run-time, the game will automatically detect for the existence of a PhysX
card and default to: "Normal" if no PhysX accelerator is detected and to:
?PhysX High? when a card is detected. The ?PhysX Extreme? option is available
for users willing to push physics to the limit on the most powerful systems
with PhysX hardware. Gamers are recommended to leave these settings at their
default levels or go lower if they experience performance issues. A dual-core
PC plus PhysX card is highly recommended to play missions at: ?PhysX High?.


All game physics is exclusively based on AGEIA PhysX SDK v2.7.1. The
corresponding system software (driver) is distributed with the game. For the
latest drivers and more news and information on GRAW2 and PhysX including
exclusive bonus content, users are encouraged to visit: www.ageia.com.

#######################################

4. Useful Web Sites, Contact Information and Technical Support

#######################################
--------------------------------------------------------------------------------
4.1. Technical Support

Technical Support:

To get technical support, go to www.ubi.com
<> and click "support" from the top toolbar.



--------------------------------------------------------------------------------
4.2. Useful Web Sites:

The official Ghost Recon Advanced Warfighter?2 site:
http://www.ghostrecon.com

To download DirectX 9.0c:
http://www.microsoft.com/downloads

Latest ATI drivers:
http://mirror.ati.com/support/drivers/powered.html

Latest NVIDIA drivers:
http://www.nvidia.com/view.asp?PAGE=drivers

Latest Creative Labs drivers:
http://www.americas.creative.com/support/welcome.asp?RD=download


#############################
####################################

5. Legal Information

#######################################

(c) 2007 Ubisoft, Inc.
Ghost Recon Advanced Warfighter?2 is a licensed trademark of Ubisoft.

All Rights Reserved.

#######################################

2 votes | 449 Views

Sunsu

Farmer Bob

Add to Friends
Send a Message